question on body lifts
#1
Seasoned Member
Thread Starter
Join Date: Mar 2009
Location: Space Coast, Fl
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
question on body lifts
whats the easiest way to do a 3in body lift
Last edited by blkcherokee; 05-29-2009 at 05:30 PM. Reason: mis spelling
#2
Junior Member
Join Date: May 2009
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L high output
On what? You can't put a body lift on a cherokee because they are unibody. A BB is pretty inexpensive, but won't hold up anywhere near as well as a full suspension lift will.
Last edited by xjkid92; 05-29-2009 at 05:37 PM.
#6
Seasoned Member
Thread Starter
Join Date: Mar 2009
Location: Space Coast, Fl
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
yep thats funny guys i am still getting use to this i am soooooo new to everything with jeeps i am just trying to learn everything i can i want it so i dont suck up any water when i go out with the rain we have been having here in florida its getting pretty nasty out
#7
CF Veteran
Well it was a funny question. if you got the $$ just put a 3" suspention lift in with 31's or maybe even a snorkel so you don't suck water into your intake. just remember your jeep is going to float in deep water if your not taking in water.
Trending Topics
#9
Senior Member
Join Date: Jan 2009
Posts: 562
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: Renix 4.0L
It'll cost you more to make an actual frame. Unibodies don't have a frame period. The entire body is the frame.
You can make your own snorkel out of PVC and call of done. If you get creative of will look good, a lot of people have done it.
You can make your own snorkel out of PVC and call of done. If you get creative of will look good, a lot of people have done it.
#10
CF Veteran
Join Date: Feb 2009
Location: socal
Posts: 7,244
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Well with a 3 inch lift if do do some good trimming on the fenders you can get some 33's under it. And the snorkle can be built using some PVC piping and a little thinking.
#11
CF Veteran
#13
CF Veteran
#14
CF Veteran
Join Date: Feb 2009
Location: socal
Posts: 7,244
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
You can make one pretty cheap heres a link somebody showed me. http://www.ausjeepoffroad.com/forum/...ad.php?t=83065