Power window swap
#1
Junior Member
Thread Starter
Join Date: Mar 2010
Location: china, maine
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Power window swap
So Iv'e done a bit of searching on here and I cant find much about swapping from manual windows to power windows. I have some serious rust on the bottom of my doors so I am buying some rust-free doors. I found the same year some color except it has full power doors.
So the question is if this is going to be a simple swap of plugging in the extra wires that already run into my doors that dont plug into anything and pop in the fuses or If i will have to run more wiring. There is plenty of info on switching from power to manual but not much in the other direction. Has anyone out there done this before?
So the question is if this is going to be a simple swap of plugging in the extra wires that already run into my doors that dont plug into anything and pop in the fuses or If i will have to run more wiring. There is plenty of info on switching from power to manual but not much in the other direction. Has anyone out there done this before?
#2
Seasoned Member
Join Date: Jan 2012
Location: Smithfield, VA
Posts: 401
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Cherokee
Engine: 4.0
If you are good with wiring it shouldnt be too much trouble. I would suggest starting with a good wiring diagram.
If you dont want to do that then you can always switch out your manual windows into your new doors.
If you dont want to do that then you can always switch out your manual windows into your new doors.
Thread
Thread Starter
Forum
Replies
Last Post
canada_man
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-04-2015 11:05 AM
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 05:31 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)