TheGreenDodger

I have a 2000 xj 4.0L and was wondering if there is any pointer I should know before I replace my power steering pump. Wrecked the xj about a 3 months ago. Just getting to fixing it up. Here are some pics too for any other suggestions

freegdr

looks like all you need is a pully no ?http://www.autozone.com/autozone/par...905889_0_4169_

freegdr

also need fan shroud

TheGreenDodger

Yea. The guy at the salvage yard kinda misled me by saying it would be easier to replace the pump. Might just keep the pump and just replace pulley. Do you know how to do replace the pulley? Any help would be good

TheGreenDodger

Yea I am just starting with the pulley then serp belt then see if any thing is messed up. The electric fan then fan shroud. And the body. And thing else I should check/ know? Better pics

freegdr

auto zone rent the tool and theres how tos on you tube

freegdr

why is this here and these lines should be hooked back to factory connections they are for evacuating crank case pressure

TheGreenDodger

It is a condensator. I can't remember when I got it. But it helped give me a little more power. But it will be coming off when I start my build. I bought the xj how it is(well minus the wreck I got in).

freegdr

thats a good one at least you did not buy it the po did

tnmedic

if you PS took that hard of a hit to break the pulley the pump will probably need to be replaced soon enough as well

TheGreenDodger

Replaced my power steering pump with the JY one. It works great so far. Super easy to install. The after that I put my serp belt on. Also pretty easy. Will post pics later