Power steering high pressure line
Thread Starter
CF Veteran
Joined: Apr 2011
Posts: 3,144
Likes: 3
From: central PA
Year: 2000
Model: Cherokee
Engine: 4.0
http://www.google.com/aclk?sa=l&ai=C...r%3D52088489AB
Can i run that on my 2000? My high pressure line on my power steering has a pin hole leak in it, needs replaced.
Can i run that on my 2000? My high pressure line on my power steering has a pin hole leak in it, needs replaced.
Member
Joined: Apr 2014
Posts: 202
Likes: 0
From: The Isle of Long, in happy and sunny New York.
Year: 1999
Model: Cherokee
Engine: Supercharged 440 Magnum punched .60 - yeah right.. 4.0 like everyone else.
You can get the same set-up for about $10 cheaper on Rockauto.com.
I just did this on mine... 13mm wrench for the lower fitting. If you are definitely removing the line... cut the line right at the base of the fitting on the steering box. Use a 13mm deep on a 1/2" long breaker. It's on there pretty good.
Hope that helps,
JR
I just did this on mine... 13mm wrench for the lower fitting. If you are definitely removing the line... cut the line right at the base of the fitting on the steering box. Use a 13mm deep on a 1/2" long breaker. It's on there pretty good.
Hope that helps,
JR
Thread
Thread Starter
Forum
Replies
Last Post
erupert66
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
Jun 7, 2021 01:45 AM
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Sep 1, 2015 10:42 AM
David Chauncey Clothier
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Aug 29, 2015 09:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



