power locks have no power
#1
Newbie
Thread Starter
Join Date: Jan 2011
Location: reno
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989 and 1994
Model: Cherokee
Engine: 4.0
power locks have no power
ok same cherokee, 1994
while trying to repair the brake light issue the interior lights and power locks decided to not work... checked fuse and it has no power to the fuse... but they were working before i started with this brake light crap..
ughhh!!
while trying to repair the brake light issue the interior lights and power locks decided to not work... checked fuse and it has no power to the fuse... but they were working before i started with this brake light crap..
ughhh!!
#2
CF Veteran
Join Date: Jul 2010
Location: 802
Posts: 4,930
Likes: 0
Received 3 Likes
on
3 Posts
Year: 99
Model: Cherokee
Engine: 4.0
jeeps and their wiring... its probably shorting somewhere, either that a loose connection might be to blame. but like i said, inferior quality on alot of the wiring in jeeps; my 99 xj's stock head unit and the wiring harness for the speakers that are down by the drivers feet were both faulty on mine. also if i bump the e flasher switch, the blinkers wont work, but neither will the e flashers... so the faulty wires coupled with little gremlins (aka the previous owner) tearing into the wiring, etc. to mod it can cause some really annoing issues. good luck.
#3
Newbie
Thread Starter
Join Date: Jan 2011
Location: reno
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989 and 1994
Model: Cherokee
Engine: 4.0
anyone have access to a real wiring diagram for this thing... all i have is the pos one in the chilton manual...
its worthless..
its worthless..
Thread
Thread Starter
Forum
Replies
Last Post
Bookspans
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
03-17-2021 07:41 PM
Jooman07
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
01-03-2016 04:15 PM
BluJay
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-09-2015 05:05 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)