on my 88 cherokee the clutch pedal seems to be loose almost. the first 1/2 you push down the pedal its not engaging at all and when i push it to the floor its still a pain in the *** to get in and out of gear. clutch isnt slipping or anything but is there a way to adjust the pedal and if so, how do you do it

 

There is no adjustment.
Check the fluid level? If it's low put dot3 brake fluid in it. If thats not the case then
your slave cylinder or master is most likely weak and going bad.
It's usually best to change both at the same time and since the tranny has to come out to change the slave it's a good time to check the clutch for wear.
Moved to oem btw.

 

look on top of you fuse box if its wet there the clutch masters leaking ,

 

X2 I discovered that when I had electrical issues.

 

same here eats the fuses up bad ...lol...

 

is it next to the brake master cylinder? i think i saw it it but it said something about break fluid on the cap so i didnt figure that was it

 

and are you talking about the fuse box right next to the clutch pedal?

 

Yup and right above that is the master.