Parts list for 4.5 lift, What else do I need?
#1
Senior Member
Thread Starter
Join Date: May 2008
Location: Charles Town, WV
Posts: 603
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2005
Model: Grand Cherokee
Engine: 3.7
Parts list for 4.5 lift, What else do I need?
I have 3" right now. Things I have or are coming are 4.5 front springs, RE adj. track bar, 1.5 shackles to go with the 3" in the rear, RE 6 degree shims and 4.5 LCS's. I will be getting extended brake lines. What else will I need. Eventually I will do a SYE but it will have to wait a little while. Also will it look dumb with 31" tires. Thanks in advance for the input.
#2
Registered User
Ya its going to shrink those 31's you are probably going to want to look into some new tires. Also I would recommend either getting longer UCA/LCA's or getting some drop brackets.
#4
Registered User
#6
Seasoned Member
Join Date: Apr 2008
Location: Reed City, Michigan
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
#7
Registered User
Trending Topics
#10
Seasoned Member
Join Date: Dec 2007
Location: raleigh, nc
Posts: 491
Likes: 0
Received 3 Likes
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L HO
yea the pinion angle will make your pinion bearing leak. 31s will look okay ( i had a friend with 31s and 5") BUT ONLY IF YOU DONT TRIM. otherwise they look tiny, i have 32s on 4.5" and they look tiny cuz i have trimmed fenders/ Leave the flares on too
#12
Senior Member
Thread Starter
Join Date: May 2008
Location: Charles Town, WV
Posts: 603
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2005
Model: Grand Cherokee
Engine: 3.7
I tell ya what I just learned a bunch. I do not plan on trimming right away and the wife would kill me if I got new tires again. I am not going to be doing any hard core wheeling so I think I should be good from what I have read on here. Thanks to everyone that chimed in.
So will I be good with 6* shims til' I can afford a SYE? I think thats the last question. Maybe.
So will I be good with 6* shims til' I can afford a SYE? I think thats the last question. Maybe.
#14
Seasoned Member
Join Date: Apr 2008
Location: Reed City, Michigan
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
yes that is what i had, and i am still using at 6.5" until i can afford an SYE and a front driveshaft for the rear