Part numbers for heater hoses?
Thread Starter
Newbie
Joined: Aug 2014
Posts: 22
Likes: 0
From: Louisville, Ky
Year: 1996
Model: Cherokee
Engine: 4.0
Part numbers for heater hoses?
So I finished up the new water pump today. Fan clutch was yesterday. Upper and lower radiator hoses and T-stat 2 weeks ago when I flushed the system. 
The radiator is only a couple of years old...
So I want to replace the two 5/8" hoses; one goes from the Thermostat to the heater valve, the other goes from the water pump inlet tube to the valve.
Does anyone know the part numbers for these 2 hoses? I don't want to do bulk heater hose cut to fit, I want to get the 90 degree bend ends.
I can't find definitive info on these, I think Dayco number 80404, or 87606 but I'm not sure.
The radiator is only a couple of years old...
So I want to replace the two 5/8" hoses; one goes from the Thermostat to the heater valve, the other goes from the water pump inlet tube to the valve.
Does anyone know the part numbers for these 2 hoses? I don't want to do bulk heater hose cut to fit, I want to get the 90 degree bend ends.
I can't find definitive info on these, I think Dayco number 80404, or 87606 but I'm not sure.
Last edited by citRon; Aug 25, 2014 at 03:55 PM.
Junior Member
Joined: Nov 2011
Posts: 95
Likes: 1
From: Birmingham, Al
Year: 2001
Model: Cherokee
Engine: 4.0
Check www.rockauto.com and look for the Goodyear hoses. Each hose is a different size.
Goodyear part #63995 and 63996
Goodyear part #63995 and 63996
Last edited by wingit; Aug 25, 2014 at 05:13 PM.
Thread
Thread Starter
Forum
Replies
Last Post
xjwolfman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Aug 26, 2020 12:59 PM
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
Nov 7, 2015 01:22 AM
Fred/N0AZZ
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
14
Oct 1, 2015 02:24 AM
lozo63
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
Sep 3, 2015 05:25 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)