OEM Trans Mount
#1
Member
Thread Starter
Join Date: Jun 2016
Location: Florida
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
OEM Trans Mount
For some reason, I'm having an awful time finding an OEM trans mount for a 00-01 XJ. I've read that the Anchor mounts are crap, so I do want to go OEM or another high quality rubber bushing. I am not interested in a poly mount.
Here's what I found using moparpartsoverstock.com:
Part number 52002334 is easily found but looks to be for older model XJs, 99 or older
Part number 52059347AA looks to be the right one but is no longer made.
Part number 52059347AB is similar to the previous one and costs over $150?! Also, I found that Crown Auto makes this for much cheaper. Does Crown make the OEM Mount?
(https://www.quadratec.com/products/56003_0026.htm)
I won't put an Anchor on my XJ. Worse case scenario would be putting a junk yard mount on since this isn't my DD. Should I go with Crown or is there another high quality mount I can get?
Here's what I found using moparpartsoverstock.com:
Part number 52002334 is easily found but looks to be for older model XJs, 99 or older
Part number 52059347AA looks to be the right one but is no longer made.
Part number 52059347AB is similar to the previous one and costs over $150?! Also, I found that Crown Auto makes this for much cheaper. Does Crown make the OEM Mount?
(https://www.quadratec.com/products/56003_0026.htm)
I won't put an Anchor on my XJ. Worse case scenario would be putting a junk yard mount on since this isn't my DD. Should I go with Crown or is there another high quality mount I can get?
#4
Senior Member
Join Date: May 2014
Location: Colorado
Posts: 672
Likes: 0
Received 4 Likes
on
4 Posts
Year: 2001, 1997
Model: Cherokee
Engine: 4.0L
Mopar 52059347AB is what I used on my 01 back in 2014. I believe it was Made in Canada similar to the motor mounts. It was expensive but it was cheaper than what Auto Zone wanted.
Since then I've noticed that NAPA has a new line of motor mounts that may work. Their older line of mounts was garbage.
I only use Crown parts if nothing else exists. They are like Dorman and A1 Cardone. Mostly pure junk with a few wins once in a while.
The 2000-2001 mounts cost more because they are only for 2 model years. The transmission crossmember & exhaust hanger are also different than previous years.
Since then I've noticed that NAPA has a new line of motor mounts that may work. Their older line of mounts was garbage.
I only use Crown parts if nothing else exists. They are like Dorman and A1 Cardone. Mostly pure junk with a few wins once in a while.
The 2000-2001 mounts cost more because they are only for 2 model years. The transmission crossmember & exhaust hanger are also different than previous years.
Last edited by md21722; 06-20-2017 at 02:53 PM.