Hey guys, I've gone through the Chilton's and Haynes Wiring diagrams but haven't been able to find the wiring diagram for the factory fog lights. I know they run through the headlights switch, but I want more info. I want to hookup my new Hella's with the factory switch. Does anyone have a diagram? or any info would be appreciated! thx

 

Gonna hi-jack this thread for a pic request.

I also have a Renix era Jeep. No factory fogs installed I picked up a switch from the JY and I have been looking for where the Relay is on factory installed Jeeps So i could pick one up at the JY.

So if anyone has pics of the relay installed that would help me locate it.

Also to the original poster I found the wiring diagram in my Haynes manual it is on page or section 12-24.

Thanks for any help.

 

I have factory fogs (not currently running them though)...I'll see what I can dig up for you.

 

Thanks anyone else!

 

I have a PDF file with diagrams I can email to any one that wants it

 

My jeep did not come from the factory with foglights. I installed a nice set of fog lights and found the switch panel for the fog light and rear defroster along with the switches at the junk yard. The way I set up my for lights are the following. I added a add a fuse deal into the fuse panel. I ran this wire to the fog lights. grounds speak for themselfs. Then I hooked up the factory switch. now the fog lights will work when the jeep is on accessory mode with out the head lights turned on. It has the factory look but the wires are ran a little different.

hope this helps.