rollurownbud

hey
i jus got my 1st jeep this past feb, and been workin the bugs out.
I was wondering if anyone has succesfully removed and cleaned the nss switch on an aw4. ive been researching but would like some real world advice before i try it. Was thinking bout retriving 1 from the junk yard 1st in case i break mine.

thanks

OverlandZJ

Lots of guys have done it successfully, myself included. It sounds as if you did read up a bit and know you need to tear it apart gently.

Theres a good writeup here if you hadnt seen it yet.

http://jeepin.net/features/nss

spahr69

yes. be careful taking it off the side of the tranny.. i busted mine allllll up taking mine off my sons jeep. pbs the bolts then take it apart slowly. clean it up. then put it back together. .. i make a picture so i put the parts in the right way.

xjmarc

Only other advice I can think of is when you split it apart make sure you don't loose any of the springs, this is from personal experience unfortunately.

rollurownbud

thanks to all for the input
practice run removing 1 at the junkyard if it doesnt rain tomorrow