Transfercase will go into 2hi 4 hi and neutie but not 4lo linkage is tight triged yankin on it won't shift in 4 lo while rolling. Or neutral. No popping. Nothing. :-(

 

Mine is somewhat tricky... Try from a stop. Foot on brake go into neutral then give it a shot. She should go thats usually how mine goes in for me. Good luck!

 

Can't even get mine into N let alone 4Lo.

 

May want to check the linkage next to the transfer case. It's adjustable and yours may have slipped or been previously misadjusted. Simple to check.

 

Check linkages, I have seen change fall into the shifter area and cause them to not move. I dug 2buxs or so outta mine.

 

It goes down there fine if linkage ain't hooked up I got into 4lo with asledgehammer ana beat the badussy out of it hooked it back up. Put in rev it slipped. Bk into neutie. It did fine till I put the 2 bolts that hold the tranny mount on the tranny on I guess it was fd up in the getgo

 

May judt be the lingage idk

 

Pops I tried it

 

[QUOTE=smokinjoe;1304336]May want to check the linkage next to the transfer case. It's adjustable and yours may have slipped or been previously misadjusted. Simple to check.[/QUote.

the linkage arm is in the slot n tried to adjus n it
with lo luck on the shiftier

 

How do you check the linkage?

 

also, are you going to the side or just trying to ram the stick back?

 

I fixed it