So i lost my turn signals, break lights, and hazards. I have replaced the relay, i checked all the fuses checked all the fuses with new ones, followed all the wiring and nothing looks bad or out of place. Please i need someones help trying to identify why this is happening.(96 4.0 xj classic automatic)

 

Is there power in and out of fuse ?

 

I dont have anythingto test if there is power

 

Gonna need it. ....http://www.homedepot.com/p/GearWrenc...A&gclsrc=aw.ds

 

I have all head lights, my brights work, my rear lights work, backup lights, everything. But when i go to turn on my signals i get no noise, no green indicators, and when i press on the break no break light's. And i replaced the parking relay and it worked for like a min then it stopped working and i talked to the previous owner and he said to mess with a red relay under the steering column and that fixed it for him but i tried messing with it and double checked it with a new relay and it didnt chnage the out come.

 

So replacing the parking light relay 'fixed' the issue for a moment? You had turn signals, indicators, and brake lights?

 

You have to check fuses for current. Fuse are only as good as current goilng thru them.

 

No when i replaced the turn signal relay i had my turn signals back for a min and then they went away again

 

You got trailer wires out back ?

 

No i dont

 

Maybe bad connection at relay then.

 

Where would ypu recommend starting for diagnosis?

 

Test light at fuses then to relay you replaced.

 

I was able to get it into a shop and they had to do a lot of soldering and rewiring previous owner somehow I messed everything up trying to do some redneck wiring