Ok all, here's the skinny.....I had to replace my right rear tail light harness and did so with a factory replacement. One thing I didn't do though was disconnect my battery first, shame on me, I know. Anyhow, what I thought was going to be a 10 minute job turned into not having brakelights or turnsignals (front or rear). I checked the usual culprit, blown fuses, etc. and all fuses are now fine (I had to replace 1). I have back up lights and running lights as well as normal headlight function.

Any suggestions on where to look next? I'm totally frustrated as everything worked fine 5 minutes before I started except the one rear running light, which is why I was replacing the harness in the first place.

Please help!

 

Relays?

 

X2 id think it would have to be in fuses or relays otherwise idk

 

Check power at fuses both sides both fuse boxes.

 

Could be a bad turn signal switch or a bad ground.