Hi guys, i'm new here and i'm looking at trading my 2wd '87 f150 for a 4x4 '94 cherokee, a few questions...

i have reasearched into it a good bit and i'm sure i can get some flex with a few bucks and some work but, the ole jeep needs a few things first.

1. how hard is it to replace the dizzy on these 4.0's? i know how to do it on the ford 302/351's.... but ive never tinkered with a jeep or an I6.
2. it needs a radiator, i know i can do this.
3. also needs a motor mount, how hard are these to do with the unibody and all? like i said earlier, i've worked on tons of fords and my dads chevy a good bit but never a jeep..or a unibody.

i'm about as big a newbie as they come when it comes to the jeeps....

 

its all the same just smaller parts

 

sweet, so on the dizzy long as i put the motor to TDC and pull the dizzy and put the new in i should be good right?

also, i was looking at the JY parts sticky and on the mustang 5.0 injectors, do you have to modify the wireing any to swap over to those?
thanks.

 

I agree, and yea when in doubt TDC always works. As for the injectors, no wiring change was required on my 2000.

 

ok well mybe by nexy weekend i will be a proud cherokee owner