need some help
#1
Member
Thread Starter
Join Date: Jun 2009
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 4.0
need some help
yall have always been there to answer my questions now i need to know how the rear main seal goes in cause its a two peace rear main do i have to drop the crank to put it in cause if i do i might plan a stroker kit and take care of all my motor issues all at once if i do
#2
CF Veteran
Join Date: Jun 2009
Posts: 5,383
Likes: 0
Received 4 Likes
on
1 Post
Year: 1988 limited
Model: Cherokee
Engine: 4.0 litre
No crankshaft removement needed.
You need to remove the oil pan and the last bearing cap, the lower half of the seal is easy, the upper half is a little more complex.
Here are a couple of writeups:
http://www.jeepin.com/features/rearmain/
http://go.jeep-xj.info/HowtoRearMain.htm
You need to remove the oil pan and the last bearing cap, the lower half of the seal is easy, the upper half is a little more complex.
Here are a couple of writeups:
http://www.jeepin.com/features/rearmain/
http://go.jeep-xj.info/HowtoRearMain.htm