Need a pic of the crank position sensor

Reply Subscribe

Thread Tools

Search this Thread

Oct 29, 2011 | 08:55 PM

JrRifleCoach

Thread Starter

Member

Joined: Aug 2008

Posts: 231

Likes: 0

Year: 1992

Model: Cherokee

Engine: 6

Need a pic of the crank position sensor

Most importantly as it is mounted on the bell housing.

TIA

Oct 29, 2011 | 09:03 PM

Caish

CF Veteran

Joined: Jun 2010

Posts: 1,220

Likes: 5

From: Arkansas

Year: 1987 & 1996

Model: Cherokee

Engine: 4.0

one I found in 2 seconds on google search.

Oct 30, 2011 | 11:42 AM

bullheimer

Junior Member

Joined: Apr 2010

Posts: 88

Likes: 0

From: NW WA

Year: 89

Model: Cherokee

Engine: straight 6

just took mine out too and not taking a pic. but the two bolts you see from the trans side are all that hold it on. there is a hole in there it fits in so it lifts straight up. it sticks down about two inches. they are hard to get to but i did it from underneath with a few extentions. my new autozone one didnt work so i'm getting a jeep unit. ps as you can see the cps is on the drivers side. this forum helped me out alot on that. there are a lot of good threads on it.