Well I'd try that, but she doesn't run right now. I had a bad CPS and had no spark. Changed it out and still no spark. Put it new junkyard coil and got very weak orange spark. I think I need a new coil, but I can't be sure. It gets 12 volts to the coil, so I think I'll try another JY coil from a Jeep I know ran good. And if that doesn't work, I don't know what yo do next.
|
My friend got pulled over with a glass pack and they sound like a "rice burner". I bought a flowmaster 40 and it sounds great. Spend the extra and buy it. The ticket were I live is $50 so a $30 muffler plus $50 plus and new stock muffler is a lot more then just buying a flowmaster. The sounds deeper and like a jeep should sound like. Looks almost stock compared to a red cherry bomb tube. Do it right the first time and not twice and spend more than necessary.
|
Originally Posted by ZachsXJ
(Post 368376)
Remind me never to move anywhere that has stupid stuff like that
|
Originally Posted by kitsapfreerider
(Post 368406)
My friend got pulled over with a glass pack and they sound like a "rice burner". I bought a flowmaster 40 and it sounds great. Spend the extra and buy it. The ticket were I live is $50 so a $30 muffler plus $50 plus a new stock muffler is a lot more then just buying a flowmaster. The sounds deeper and like a jeep should sound like. Looks almost stock compared to a red cherry bomb tube. Do it right the first time and not twice and spend more than necessary.
i always do intake and exhaust first on all my vehicles and sence i cant afford a super 44 or a safari snorkel i havent touched the intake or exhaust yet haha |
Originally Posted by kitsapfreerider
(Post 368406)
My friend got pulled over with a glass pack and they sound like a "rice burner". I bought a flowmaster 40 and it sounds great. Spend the extra and buy it. The ticket were I live is $50 so a $30 muffler plus $50 plus a new stock muffler is a lot more then just buying a flowmaster. The sounds deeper and like a jeep should sound like. Looks almost stock compared to a red cherry bomb tube. Do it right the first time and not twice and spend more than necessary.
|
I'm doing the same right now with college tuition going up I have no money... Save a little and do it right. I caught my muffler on a rock, my CPS went out, and tail pipe got flattened on the same rock in one weeks so I know how you feel. Dealer screwed my over with the cps, Never threw a code and I took it to the dealer and they put one in and it cost me 300. Here is one that might work. My set up is not stock and I can't remember what stock is. If it doesn't fit(to short) get a small male/female piece of tube and put it between your cat and exhaust. Cut it if it is to long.
http://cgi.ebay.com/ebaymotors/ws/eB...d=140322944986 Well the link I think is broken. You can find one for $60-70. |
Originally Posted by kitsapfreerider
(Post 368429)
I'm doing the same right now with college tuition going up I have no money... Save a little and do it right. I caught my muffler on a rock, my CPS went out, and tail pipe got flattened on the same rock in one weeks so I know how you feel. Dealer screwed my over with the cps, Never threw a code and I took it to the dealer and they put one in and it cost me 300. Here is one that might work. My set up is not stock and I can't remember what stock is. If it doesn't fit(to short) get a small male/female piece of tube and put it between your cat and exhaust. Cut it if it is to long.
http://cgi.ebay.com/ebaymotors/ws/eB...d=140322944986 Well the link I think is broken. You can find one for $60-70. |
Do the tin can fix until you can do it right. Thats what i did. Take a large tin/aluminium can and cut it and fit it over current exhaust. This will work very temporarily. There wont be a leak if done right.
|
Originally Posted by kitsapfreerider
(Post 368442)
Do the tin can fix until you can do it right. Thats what i did. Take a large tin/aluminium can and cut it and fit it over current exhaust. This will work very temporarily. There wont be a leak if done right.
ok thats too much for me haha i would do the glasspack before i did this |
They don't make a large enough can for my application. My buddy is a professional welder and I can weld good enough to make it hold, but going through all that work seems pointless when I can buy a $25 muffler and clamp it on it 10-15 mins. The prep work required to weld the muffler shut would take more than that alone. I usually try to do things the right way, but this is just one of those times where I have neither the money or time.
|
Originally Posted by 96Cherokee113
(Post 368449)
They don't make a large enough can for my application.
|
Yea, haha. That would be a pretty bullet proof muffler, too. I should just straight pipe it. It's practically free to do, but I hear these XJs run like crap with no back pressure. Well, I'm about to call it a night. I worked for 10 hours on my feet today and I'm tired. I'll post tomorrow with a picture of my muffler. But for now, Merry Christmas to all and to all a good night.
|
No inspections here in michigan and no it does not sound like a "rice burner" and i have never been pulled over period. I will say that they sound like crap with out a tailpipe so you have to run one or the drone inside will kill you. Mine has a low toned idle for a 6cyl and when I rev it up it sounds pretty powerful I have had people that know nothing about cars ask me what V8 I have i just walk away.
|
Originally Posted by XJ?2010
(Post 368461)
No inspections here in michigan
|
Originally Posted by Teal2doorXJ
(Post 368463)
guess where im moving when i can afford it
o and ive got a flowmaster 40 installed for $50 including the muffler itself of course it was used but a lot of exhaust shops have mufflers people put on for one day then hate the sound and have removed the next just something you may want to look into if you want a cheap muffler but don't want a glasspack |
All times are GMT -5. The time now is 11:04 AM. |
© 2024 MH Sub I, LLC dba Internet Brands