Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Need a new head - best options?

Thread Tools
 
Search this Thread
 
Old 07-18-2011, 10:40 PM
  #1  
Junior Member
Thread Starter
 
Chihlidog's Avatar
 
Join Date: Sep 2010
Location: Pittsburgh, PA
Posts: 44
Likes: 0
Received 0 Likes on 0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Default Need a new head - best options?

I have an '01 with the 0331. I dont want to put another 0331 on there. I know there's a manufacturer that makes them strnger than the factory, I've read about them on here but cant remember the name.

I've also seen guys use heads from later year Wranglers from the JY. is '02 a safe year for it or do I need to go later? Also, is the head from a Grand Cherokee 4.0 useable?


Thanks guys.
Old 07-19-2011, 12:39 AM
  #2  
Senior Member
 
413maxwedge's Avatar
 
Join Date: Jan 2011
Location: Upstate N.Y
Posts: 689
Likes: 0
Received 1 Like on 1 Post
Year: 2000.1999,1996
Model: Cherokee
Engine: 4.0
Default

Late 2001 and up are fine aslong as the have the provisions for your coil pack. Other will tell you to just make a bracket for it, but why do it half-assed like that when it can be done the right way plus it is part of grounding the c-pack yes you can use heads up to atleast I think 2008 you will have to do some double checking on this to make sure everything is in order for your motor.(But I do know it can be done).Even though the head are the same as far as valve size etc go, from the new 0331 casting's go, but good luck and I would like to know your outcome even if you pm me thanks and gl, I believe the gc heads will work but to cover any doubt double check over in the gc website.
Old 07-19-2011, 01:22 AM
  #3  
Member
 
victorlanda's Avatar
 
Join Date: Mar 2011
Location: El Centro, CA
Posts: 176
Likes: 0
Received 0 Likes on 0 Posts
Year: 1988
Model: Comanche
Engine: 4.0L
Default

the aftermarket ones are
Hesco and Alabama....
at least the ones i know about.
Old 07-19-2011, 02:08 AM
  #4  
Member
 
Jeepability's Avatar
 
Join Date: Dec 2010
Location: South Georgia
Posts: 224
Likes: 0
Received 0 Likes on 0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Default

i think 06 is the last year they stopped puttin em in vehicles so go from 02 to 06
Old 07-19-2011, 10:49 AM
  #5  
Junior Member
Thread Starter
 
Chihlidog's Avatar
 
Join Date: Sep 2010
Location: Pittsburgh, PA
Posts: 44
Likes: 0
Received 0 Likes on 0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Thanks guys. I'll check out hesco. I'd rather do this for as little as possible. My father in law is a really good mechanic, and Im not a COMPLETE moron with an engine (just a little bit of a moron), so I've got labor covered. But I am hoping to get a head for a reasonable price.

Appreciate the feedback.
Old 07-19-2011, 01:17 PM
  #6  
Member
 
victorlanda's Avatar
 
Join Date: Mar 2011
Location: El Centro, CA
Posts: 176
Likes: 0
Received 0 Likes on 0 Posts
Year: 1988
Model: Comanche
Engine: 4.0L
Default

Hesco nice, i'm gonna get one of those one of these days... take pictures of the process
and just in case you and your father get stuck at something this might help.
http://www.jeepforum.com/forum/f11/h...ite-up-235621/

Last edited by victorlanda; 07-19-2011 at 01:24 PM.
Old 07-19-2011, 01:25 PM
  #7  
Newbie
 
kyjeepguy's Avatar
 
Join Date: Jun 2011
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Just put a Clearwater head on my 2000. Fully assembled and bulked up in the lands between valves. $450 shipped with no core. Went great and runs great now! You can find Clearwater Cylinder Heads store on eBay.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
t.mcginley.jr
Jeep Builds
105
01-31-2024 04:58 PM
kado
Cherokee Chat
14
09-17-2015 12:22 AM
eagle11401
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-10-2015 09:06 PM
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:49 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Need a new head - best options?



All times are GMT -5. The time now is 05:49 PM.