Need help please :(
06-18-2011, 07:16 PM
#1
Newbie
Thread Starter
Join Date: Jul 2009
Location: Puerto Rico
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L
Need help please :(
1995 cherokee sport 4.0L automatic 4x4
ok here we go. I replace my engine block with a 90' block, I replace the flywheel and use my 95' head; I use my 95' ignition.
The problem is that now after a lot of days working alone the engine wont start. Please someone help me!!!!!!
ok here we go. I replace my engine block with a 90' block, I replace the flywheel and use my 95' head; I use my 95' ignition.
The problem is that now after a lot of days working alone the engine wont start. Please someone help me!!!!!!
06-19-2011, 08:43 PM
#6
Newbie
Thread Starter
Join Date: Jul 2009
Location: Puerto Rico
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L
sorry, I will start it again;
I only replace the block with one from a 90', everything else is from my engine. I have fuel at the rail, spark at the coil and at the 1 spark (I only check spark at the #1 spark cable). Yesterday I took out the ignition, take #1 piston to TDC and then installed the ignition so the rotor faced to the #1 ignition terminal. I try to start it but nothing only a bit of flame came out of the end of the exhaust manifold. Now it don't even crank and the starter do nothing, this thing is driving me crazy.
I only replace the block with one from a 90', everything else is from my engine. I have fuel at the rail, spark at the coil and at the 1 spark (I only check spark at the #1 spark cable). Yesterday I took out the ignition, take #1 piston to TDC and then installed the ignition so the rotor faced to the #1 ignition terminal. I try to start it but nothing only a bit of flame came out of the end of the exhaust manifold. Now it don't even crank and the starter do nothing, this thing is driving me crazy.