I need some help asap im installing the coils in the front I have rc 3" aal I disconnected yhe dwaybars and the coil clips and the axel wont drop I need help u can call my cell please 603 943 2167

 

You will need to jack the body up on jackstands and put a jack under the front diff and slowly drop it down. With the tires off you should be able to lower it enough to get the springs out.

 

I have the body on jacks and I had adm jack under the axel and lowered it and it still wont lower enough
N

 

did you disconnect your shocks??

 

This.
Then raise the jackstands.

 

.

 

^sorry^ i did mine with just a jack under the frame. one side at a time

 

That's how I've done it in the past to other cars..... easiest way IMO

 

I have every thing off the instructions say to do, the axel I basically floating so bgee thing is preventing it from lower can u call my cell I cann explain it better

 

If everything is disconnected and it still isnt low enough you need to get the body higher off the ground so you can lower the axle more.
Or do it one side at a time like the other posts stated. I did both of mine at the same time.

 

do you have a coil compressor?

 

How do I re attach my lower control arms?

 

i had to disconnect the lower control arms and it gave me extra room but it was a pita to get the lower control arms back on

 

you get your lift on?

 

Shocks, brake lines, drag link, sway bars. unbolt all of those, and the axle will droop as much as you want it to. Absolutly no need to unbolt a control arm. The easiest way to get it back on is to of course, unbolt everything I said, so you can have more movement in the axle.