Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Need center pin

Thread Tools
 
Search this Thread
 
Old 02-05-2012, 10:53 AM
  #1  
Senior Member
Thread Starter
 
rklettke's Avatar
 
Join Date: Oct 2011
Location: Phoenix, AZ
Posts: 542
Likes: 0
Received 1 Like on 1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 L6
Default Need center pin

Where can i buy a center pin for the leaf springs? I need it asap! I'm in monterey , CA so if that helps somehow... Anyways, text me i guess... 503 449 3949. Also could use u-bolts. but im pretty sure autozone will have those.
Old 02-05-2012, 10:56 AM
  #2  
Senior Member
 
xjbeadlocks's Avatar
 
Join Date: Jan 2012
Posts: 535
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Originally Posted by rklettke
Where can i buy a center pin for the leaf springs? I need it asap! I'm in monterey , CA so if that helps somehow... Anyways, text me i guess... 503 449 3949. Also could use u-bolts. but im pretty sure autozone will have those.
4wheelparts keeps them on the shelf. sometimes even autozone has them. try napa and orielys
Old 02-05-2012, 11:00 AM
  #3  
Senior Member
Thread Starter
 
rklettke's Avatar
 
Join Date: Oct 2011
Location: Phoenix, AZ
Posts: 542
Likes: 0
Received 1 Like on 1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 L6
Default

ill check for a 4wheelparts around here thanks. havent tried napa yet
Old 02-05-2012, 11:18 AM
  #4  
Senior Member
 
xjbeadlocks's Avatar
 
Join Date: Jan 2012
Posts: 535
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Old 02-05-2012, 11:24 AM
  #5  
CF Veteran
 
trans_am7935's Avatar
 
Join Date: May 2009
Location: Glen Burnie, MD
Posts: 1,844
Likes: 0
Received 3 Likes on 3 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 H.O. K&N, Borla headers, custom down pipe, magnaflow hi-flo cat, flowmaster to turn down tip
Default

dont get new center pins, just use a grade 8 bolt, that is what i did. i replaced my center pins with a 3" stainless steel grade 8 bolt. the only way to go! make sure you clean the leaf pack and that the slide pads are in place
Old 02-28-2012, 08:25 PM
  #6  
Member
 
chuckanut's Avatar
 
Join Date: Jan 2010
Location: Moses Lake Wa
Posts: 208
Likes: 0
Received 0 Likes on 0 Posts
Year: 1989
Model: Cherokee
Default

Originally Posted by trans_am7935
dont get new center pins, just use a grade 8 bolt, that is what i did. i replaced my center pins with a 3" stainless steel grade 8 bolt. the only way to go! make sure you clean the leaf pack and that the slide pads are in place
Sorry for my ignorance, how did you do this? I noticed my leaves slid a bit. I'm assuming the center pin broke and going to fix it soon
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Morris4x4Center
Vendor Showcase
2
04-20-2016 02:59 PM
Dan Fredrickson
Vendor Showcase
2
10-04-2015 01:26 PM
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
10-02-2015 08:04 PM
Morris4x4Center
Vendor Showcase
2
10-02-2015 03:12 PM
Morris4x4Center
Vendor Showcase
0
09-29-2015 12:21 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Need center pin



All times are GMT -5. The time now is 07:03 PM.