i'm not sure how long they have been breaking, but the other day went accross a hard bump and heard a bad noise! when i finally got it home to inspect i found that all three bolts on the right motor mount have been sheared off in the block. any ideas on an easier fix than pulling the motor? might have enough room to drill from underneath, but it will be difficult. any help would be awesome. thanks.

 

if you cant get to them with a angle drill if there enough room you might want to see if you can get someone to weld nuts on them and back them out...

 

Left-handed drill bits are your friend.

 

done same to mine .easy fix, looks harder than it is ...take everything out of your way . i had to move battery. water washer bottle,take weight of motor with jack, get ya 3/4 drill bit and drill into bolts enough to start ya easy-outs and away ya go...hope this helps mate ...pics are the bolts out, and a tool similar to what i used.

 

i moved the mount that is on the body as well, just to make more room ...its tight but can be done , and not to bad ....any question just ask mate ..hope this helps

 

awesome! thanks to everyone for the help. i'll be trying it this weekend so will update when done. hopefully i can get all three, but at least two would be great. thanks.