Milling a cherokee head...few questions..
#1
Newbie
Thread Starter
Join Date: Dec 2008
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Milling a cherokee head...few questions..
Gonna have a friend who has a machine shop mill my cylinder head down to help out with the compression.
I cant find out anywhere, whats a safe amount that can be milled?
I dont know if .010, .020, .030, .040...etc will work...
Just trying to get it figured out. Im not worried about piston to valve clearance as the pistons have the 13.1cc dish. Shoudnt be any issues there at all.
Only thing would be the pushrods, I would have to find some shorter ones , or shim the rockers the right amount.
I cant find out anywhere, whats a safe amount that can be milled?
I dont know if .010, .020, .030, .040...etc will work...
Just trying to get it figured out. Im not worried about piston to valve clearance as the pistons have the 13.1cc dish. Shoudnt be any issues there at all.
Only thing would be the pushrods, I would have to find some shorter ones , or shim the rockers the right amount.
Thread
Thread Starter
Forum
Replies
Last Post
Big Ray
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
08-27-2015 08:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)