Melted blower switch
#1
Newbie
Thread Starter
Join Date: Nov 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Melted blower switch
Hello! I am new to the forum, and after poking around for a bit like what I see!
I have a 97 XJ with three inches of lift. The blower stopped working, I can feel heat coming out of the vents but that is all. I replaced the blower panel, the other switches look fine, but the blower one was partially melted inside as well as the harness that connects to it. I replaced both, but still nothing. It is getting power as the panel lighting still works.
Anyone have this problem or a solution?
Chris
I have a 97 XJ with three inches of lift. The blower stopped working, I can feel heat coming out of the vents but that is all. I replaced the blower panel, the other switches look fine, but the blower one was partially melted inside as well as the harness that connects to it. I replaced both, but still nothing. It is getting power as the panel lighting still works.
Anyone have this problem or a solution?
Chris
#3
CF Veteran
Join Date: Mar 2009
Location: Tenn. and Mich.
Posts: 28,068
Likes: 0
Received 6 Likes
on
6 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
Hey Chris, Welcome to CF.
Here's a link about that problem. It's about the WJ, but the problem is the same. http://www.wjjeeps.com/blower_motor.htm
Here's a link about that problem. It's about the WJ, but the problem is the same. http://www.wjjeeps.com/blower_motor.htm
#4
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Hello! I am new to the forum, and after poking around for a bit like what I see!
I have a 97 XJ with three inches of lift. The blower stopped working, I can feel heat coming out of the vents but that is all. I replaced the blower panel, the other switches look fine, but the blower one was partially melted inside as well as the harness that connects to it. I replaced both, but still nothing. It is getting power as the panel lighting still works.
Anyone have this problem or a solution?the panel light is not on the same circut or fuse as the blower switch
Chris
I have a 97 XJ with three inches of lift. The blower stopped working, I can feel heat coming out of the vents but that is all. I replaced the blower panel, the other switches look fine, but the blower one was partially melted inside as well as the harness that connects to it. I replaced both, but still nothing. It is getting power as the panel lighting still works.
Anyone have this problem or a solution?the panel light is not on the same circut or fuse as the blower switch
Chris
#6
CF Veteran
It is a common problem throughout the range of XJs. There is a lot of amperage going through the switch and eventually they fail. You will need to replace the switch. You can substitute spade connectors for the end of the harness if you want
Thread
Thread Starter
Forum
Replies
Last Post
pTacRP
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
08-01-2021 12:35 PM
ZJBeachRunnerGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
18
03-10-2021 05:52 PM
Stabsthedrama
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
10-03-2015 05:46 PM
Jeremy Millner
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
10-02-2015 02:21 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)