Melted blower motor wiring
01-30-2019, 06:03 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2018
Location: Montana
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee(XJ)
Engine: 4.0
Melted blower motor wiring
What is the best way to go about fixing this mess? There doesn't seem to be a way for me to pull whats left of the harness down from under the dash without removing the entire dash, is that correct? This was all like this when I bought it, unfortunately.
01-30-2019, 11:53 PM
#2
Senior Member
Join Date: Mar 2016
Location: Oklahoma
Posts: 621
Likes: 0
Received 9 Likes
on
9 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L L6 PowerTech (stock)
Id try a slicing of the black protective tube for the wiring and that tape. Open the tubing to pull more length of wiring. Use shrink wrap and cut enough of the way behind the corrosion to ensure proper connection, if possible. They sell connectors with long lengths of wires. You are in a tight spot there. Mine was a similar case, but in my Wrangler.
Thread
Thread Starter
Forum
Replies
Last Post
SCHuntXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
02-02-2019 08:17 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)