Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here (https://www.cherokeeforum.com/f2/)
-   -   Map vacuum help! (https://www.cherokeeforum.com/f2/map-vacuum-help-243116/)

Jake Dylan Wilson Mar 17, 2018 07:13 PM
Map vacuum help!
 
Okay so I’ve searched on here and I haven’t found a solution. I was checking my Map sensors vacuum line for cracks or leaks when it snapped in half. I used a peice of 1/8 vacuum hose and spliced the ends back but now when I start it will just immediately die. Its pulling good vacuum but won’t run.
Its an 89 XJ 4.0 also

freegdr Mar 18, 2018 03:36 AM
Originally Posted by Jake Dylan Wilson (Post 3475143)
Okay so I’ve searched on here and I haven’t found a solution. I was checking my Map sensors vacuum line for cracks or leaks when it snapped in half. I used a peice of 1/8 vacuum hose and spliced the ends back but now when I start it will just immediately die. Its pulling good vacuum but won’t run.
Its an 89 XJ 4.0 also
Last time IAC was cleaned ?

cruiser54 Mar 18, 2018 07:54 AM
Originally Posted by Jake Dylan Wilson (Post 3475143)
Okay so I’ve searched on here and I haven’t found a solution. I was checking my Map sensors vacuum line for cracks or leaks when it snapped in half. I used a peice of 1/8 vacuum hose and spliced the ends back but now when I start it will just immediately die. Its pulling good vacuum but won’t run.
Its an 89 XJ 4.0 also
http://cruiser54.com/?p=280


All times are GMT -5. The time now is 10:28 AM.


© 2026 MH Sub I, LLC dba Internet Brands