im running 33s now with stock 3.55s in a chrysler 8.25 but the gas mileage sucks and its so gutless I was looking to regear but ive never done them myself so I might go to a shop but is there a rear that came stock with 4.10s or around that that I can just swap in for the rear?

 

just have it done at a shop...swapping out whole diffs can leave you doing brakes and axle joints or wheel bearings not to mention i don't think you can get a 4cyl.(thats where you can find 410s) with a 8.25

 

its just moneys tight and I can swap in a whole rear no problem just something as precise as gears not sure I really wanna try it on the car i need to drive everyday but 4cyl came with 4.10s?in what rear

 

4 bangers that i have seen in sticks have 4:10s you obviously need both axles and usually are 30/35s and like i said you don't know the condition of anything on the axles (brakes,joints,bearings,balljoints,)

 

have alot of people on here done this swap

 

5 spd 4 cyl is 3.73 I think, auto 4 cyl is 4.10. Cause I know for sure that 6cyl auto is 3.55 and stick is 3.07