looking into JCR 1ton steering need advice
#1
Seasoned Member
Thread Starter
Join Date: Apr 2009
Location: Northeast PA
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0, k&n intake Flomaster cat back
looking into JCR 1ton steering need advice
first off heres the link: http://www.jcroffroad.com/Merchant2/...tegory_Code=S6
im looking to convert my 97xj's front steering. keep bending/breaking the tie rod, and keep bending/breaking the tie rod end on the track bar. im looking into this jcr offload 1ton over the knuckle, steering upgrade. has anyone else done this, have any pros/cons, or any other alternate suggestions?
Also if anyone who has done this could let me know what is involved in doing this. i have a decient knoledge but dont have many special tools i may need. thanks
oh and i have a 6" lift(skyjacker), control arm drop, adj. track bar(think its too small/short for the lift, thats why i keep breakin ends, i think) the rest of the steering is stock from what i can tell.
im looking to convert my 97xj's front steering. keep bending/breaking the tie rod, and keep bending/breaking the tie rod end on the track bar. im looking into this jcr offload 1ton over the knuckle, steering upgrade. has anyone else done this, have any pros/cons, or any other alternate suggestions?
Also if anyone who has done this could let me know what is involved in doing this. i have a decient knoledge but dont have many special tools i may need. thanks
oh and i have a 6" lift(skyjacker), control arm drop, adj. track bar(think its too small/short for the lift, thats why i keep breakin ends, i think) the rest of the steering is stock from what i can tell.
Thread
Thread Starter
Forum
Replies
Last Post
Dyno89
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-13-2015 02:23 PM
ARCH4NGEL_II
Modified XJ Cherokee Tech
0
09-07-2015 12:18 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)