locktight on waterpump pully?
02-07-2010, 09:59 AM
#1
Member
Thread Starter
Join Date: Nov 2009
Location: Vernon B.C. Can.
Posts: 214
Likes: 0
Received 26 Likes
on
16 Posts
Year: 89
Model: Cherokee
locktight on waterpump pully?
Just change my water pump ,{first time wasn,t to bad,} was wondering if I should put a little locktight on the pump pulley,is hard to get them tight as the pulley turns
02-07-2010, 10:59 AM
#2
CF Veteran
no need to.
just use a pry bar to hold the pulley as you tighten each bolt.
just use a pry bar to hold the pulley as you tighten each bolt.
Last edited by caged; 02-07-2010 at 11:02 AM.
Thread
Thread Starter
Forum
Replies
Last Post
OGCollard
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
21
08-27-2015 08:11 AM
mitchell561
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
05-29-2010 06:22 PM
daveman119
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
12-29-2009 08:53 PM
XJ?2010
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
10-24-2009 05:00 PM
bob tarin
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
09-08-2009 09:29 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)