Inside the old Fuel Filter...pics :)
Thread Starter
Member
Joined: Oct 2009
Posts: 244
Likes: 4
From: New York, USA
Year: 1996
Model: Cherokee
Engine: 4.0L I6
Reminds me, I need to check my plugs and check what the dist looks like inside... I just got the jeep about 2 months ago, and havent checked the plugs yet, I will pull one from the front cylinder and see what it looks like..
What are you talking about? Ahah. I'm sure there are enough in stock around the country that you should be able to hunt one down. It might be chinese crap, but then again what isn't nowadays?
Thread Starter
Member
Joined: Oct 2009
Posts: 244
Likes: 4
From: New York, USA
Year: 1996
Model: Cherokee
Engine: 4.0L I6
I have some of that done. Front diff done, trans fluid done (i cheated though and had a lube place do it for me)
still need to do the rear diff, xfer case, coolant, plugs, wires, dist cap, valve cover gasket, get the stupid locking lugs off there, oh yeah and actually get it inspected.
still need to do the rear diff, xfer case, coolant, plugs, wires, dist cap, valve cover gasket, get the stupid locking lugs off there, oh yeah and actually get it inspected.
Thread Starter
Member
Joined: Oct 2009
Posts: 244
Likes: 4
From: New York, USA
Year: 1996
Model: Cherokee
Engine: 4.0L I6
hah hah

speaking of the devil and where things are made, I looked at the NAPA's Gold filter as I was making shure which end is IN which is OUT ...and there's lable there: "Made In Israel". I haven't ever seen anything of that nature "made in Israel". Must be rare.
I bought a Huge Chinese C-Clamp the same day there, btw ...heh heh
...Oh! and NAPA's "top-gun"(the best off the shelf, that is) grease gun also Made In China, works fine so far

speaking of the devil and where things are made, I looked at the NAPA's Gold filter as I was making shure which end is IN which is OUT ...and there's lable there: "Made In Israel". I haven't ever seen anything of that nature "made in Israel". Must be rare.

I bought a Huge Chinese C-Clamp the same day there, btw ...heh heh
...Oh! and NAPA's "top-gun"(the best off the shelf, that is) grease gun also Made In China, works fine so far
I have some of that done. Front diff done, trans fluid done (i cheated though and had a lube place do it for me)
still need to do the rear diff, xfer case, coolant, plugs, wires, dist cap, valve cover gasket, get the stupid locking lugs off there, oh yeah and actually get it inspected.

still need to do the rear diff, xfer case, coolant, plugs, wires, dist cap, valve cover gasket, get the stupid locking lugs off there, oh yeah and actually get it inspected.

Mine will pass its just a matter of having time and money at the same time.
Here they don't use stickers anymore its all electronic. It is attached to your licence plate info. So if a cop pulls you over he runs your tags and can tell if you are inspected or not.



