|
IGN Wire in the fuse panel???
1 Attachment(s)
ok, long story short i ****ed up and on my fuse panel under the dash i unplugged the wire that connects into the slot marked (IGN) to get my gauge fuse to work without popping immedietly. My question is what does that wire do? and where does it lead to?
Attachment 115499 |
This is all I have handy. Its for A DIFFERENT RENIX JEEP. I'm not at all sure what they might share. Seems right for my 90.
http://www.scribd.com/justin-goldber...-Cherokee-1989 |
from factory there are no wires plugged into the front off thebox like that that just a connection that deliver power in the run position of key switch
|
My link shows a Blk Wt from "gauges" fuse to inst clstr....on the diagram for 89.
|
Originally Posted by DFlintstone
(Post 1751441)
My link shows a Blk Wt from "gauges" fuse to inst clstr....on the diagram for 89.
|
Originally Posted by 91XJBlackonBlack
(Post 1751203)
ok, long story short i ****ed up and on my fuse panel under the dash i unplugged the wire that connects into the slot marked (IGN) to get my gauge fuse to work without popping immedietly. My question is what does that wire do? and where does it lead to?
Attachment 115499 |
can i run my rig without that ign wire plugged in? Everytime i plug that in my gauge fuse pops. so frustrating...
|
Originally Posted by 91XJBlackonBlack
(Post 1751457)
can i run my rig without that ign wire plugged in? Everytime i plug that in my gauge fuse pops. so frustrating...
|
Originally Posted by freegdr
(Post 1751456)
what aftermarket acc do you have that dont work
|
Originally Posted by 91XJBlackonBlack
(Post 1757323)
You mean like headunit, amp and subs?
|
| All times are GMT -5. The time now is 03:45 AM. |
© 2026 MH Sub I, LLC dba Internet Brands