IAT Sensor, no voltage P0112 Error Code
#1
Newbie
Thread Starter
Join Date: May 2018
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
IAT Sensor, no voltage P0112 Error Code
Hi All,
My check engine light is so close to finally being off, and hopefully my rough idle woes will be gone! Woohoo! I have one last code that I am receiving for the IAT sensor (P0112). Seems like it is related to the voltage which a test with a multimeter confirmed that is in-fact there is not voltage reading on the wires. For fun, I did try a new sensor as mine looked a bit corroded, still same issue. Wondering what the next steps would be to confirm whether it would be the wiring or the PCM and the repair steps for either.
Thanks in advanced!
My check engine light is so close to finally being off, and hopefully my rough idle woes will be gone! Woohoo! I have one last code that I am receiving for the IAT sensor (P0112). Seems like it is related to the voltage which a test with a multimeter confirmed that is in-fact there is not voltage reading on the wires. For fun, I did try a new sensor as mine looked a bit corroded, still same issue. Wondering what the next steps would be to confirm whether it would be the wiring or the PCM and the repair steps for either.
Thanks in advanced!
#2
Newbie
Thread Starter
Join Date: May 2018
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
Just wondering if anyone could provide some insight on this? It's the only code thats being thrown at the moment for me. Seems to be causing a rough idle for me.
Thread
Thread Starter
Forum
Replies
Last Post
Nissantech
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
10-30-2017 07:45 AM
af908
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
12-15-2010 01:15 AM
Moody1013
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
10-14-2010 07:53 PM
#999
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
07-30-2010 07:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)