Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

I need some help!

Thread Tools
 
Search this Thread
 
Old Aug 13, 2010 | 10:33 AM
  #1  
survivinginmichigan's Avatar
Thread Starter
Newbie
 
Joined: Aug 2010
Posts: 4
Likes: 0
Model: Cherokee
Question I need some help!

Hi. I have a 93 Cherokee 4.0 2WD automatic. My daughter is taking it to school in a week. I have been getting it road ready for her this summer. I have it just about ready to go and now the wipers don't work. You can move the arms with no resistence, like they are not connected. What do I do now? I hope it's something I can do myself but i don't see how I gain access to the works for the wipers! Any help would be greatly appreciated! thanks -jim
Reply
Old Aug 13, 2010 | 10:35 AM
  #2  
Diesel's Avatar
CF Veteran
 
Joined: Aug 2010
Posts: 2,112
Likes: 4
From: Wantage, NJ
Year: 1995
Model: Cherokee
Engine: 4.0 I6
Default

By the bottom of the wipers, take out the screws near the windshield, check the gears and see if motors are spinning
Reply
Old Aug 13, 2010 | 11:46 AM
  #3  
G_P's Avatar
G_P
Senior Member
 
Joined: May 2009
Posts: 559
Likes: 0
From: Middlesex County CT
Year: 1993
Model: Cherokee
Engine: 4.0 H.O
Default

The piece that the wiper arm shafts come through is removable by taking out a bunch of phillips head screws.

There are plastic bushings on the wiper linkage that like to wear out and break. Most likely it has popped out of the bushing and is no longer connected to the motor.

You can get replacement bushings in the HELP! products section at your local parts store. I dont remember the part #off the top of my head tho.....
Reply
Old Aug 13, 2010 | 01:33 PM
  #4  
survivinginmichigan's Avatar
Thread Starter
Newbie
 
Joined: Aug 2010
Posts: 4
Likes: 0
Model: Cherokee
Default thanks for info!

thanks for info, I'm going to tear into it when I get home tonight-cheers
Reply
Old Aug 16, 2010 | 06:42 AM
  #5  
survivinginmichigan's Avatar
Thread Starter
Newbie
 
Joined: Aug 2010
Posts: 4
Likes: 0
Model: Cherokee
Default

Ended up fabricating a wire clip to hold arm to little ball socket on motor. Couldn't find a bushing. It should hold for a while I hope. Thanks for the help!
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 08:43 AM.