So I've decided to do the injector swap on my 2000 XJ, just wanted to be 100% certain, are these the right ones? http://cgi.ebay.com/ebaymotors/FORD-...Q5fAccessories

 

No, you need 784's

 

That's what I was coming up with too the Orange Ford's from crown vic's.

I haven't done it but that seems to be what you want for 99-01 xj's.

I believe the 784's are the 4 hole, the fords are single hole but better atomization.

I can't tell you for sure

Nathan
-99 xj 2 batteries...

 

You can always message no rdplz, he would know

 

Those are the Ford alternative to the 784's and will work in your 2000. Just make sure they're properly cleaned, tested, and have new o-rings and filters in them before installing.

 

Thats my bad, I was wrong

 

So the Orange Ford ones or the Chrysler 784's will work for the 1998?-2001?

Is one of them significantly better than the other?

Is there place you can get new o-rings? is that something you can get from Napa?

Thanks

Nathan
-99 xj two red tops under the hood

 

They only have one hole? Oh...

 

Would these work? heres the number. I got these last year out of an Exploder, 2000 i believe.

F6VE - A5A

0280155710

 

find your year

 

Yeah,thats useless for me. My numbers for the injectors i have are not on that list or the aussiespeed link.

Thats why i asked.but thanks.

 

if it aint on the list then they wont fit on a xj

 

^^ Not true.Good example is the 849's. OEJ, those 710's will work.

 

After looking at the list again, i did find the ones i have. they are listed for 91-95xjs. mine is a 99.

Guess i'llbe goin to the j-yard anyway.

Sorry to the O/P. I didn't mean to take over your thread. I guess i can sell these.
or barter them.

 

Those orange ones will work in a '00 as an upgrade but put out less flow per minute than the standard 784's...The orange Ford 917's flow at about 212 cc/min while the 784's flow at 238 cc/min. Bottom line is those orange ones are a step up from the stock '00 XJ injectors but not as much as the 784's. But they would look cooler in you engine compartment.

These would be a good compromise though. http://cgi.ebay.com/ebaymotors/Injec...item4cf5a59de6