hpd30 gear help
#1
Newbie
Thread Starter
Join Date: Feb 2012
Location: NW Burbs of Chicago
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
hpd30 gear help
Hey guys,
I got a high Pinion Dana 30 with the vacuum disco
Question is with the gears, I got them with the understanding that it had 4.10s
but I just ripped into it and it has 41 teeth on the ring, and 11 teeth on the pinion.
my understanding of gears is that its (ring teeth)/(Pinion teeth) and thats your gearing.
so this one would be 3.73???
and if it really is 3.73, what jeeps had 3.73s stock in the early 90s (please include model, motor, and trans type)
I got a high Pinion Dana 30 with the vacuum disco
Question is with the gears, I got them with the understanding that it had 4.10s
but I just ripped into it and it has 41 teeth on the ring, and 11 teeth on the pinion.
my understanding of gears is that its (ring teeth)/(Pinion teeth) and thats your gearing.
so this one would be 3.73???
and if it really is 3.73, what jeeps had 3.73s stock in the early 90s (please include model, motor, and trans type)
#3
Newbie
Thread Starter
Join Date: Feb 2012
Location: NW Burbs of Chicago
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
thats a good thread, im just going to call them 3.73s, unless your driving on dry pavement for quite a distance, that .003 isnt going to make a difference, specially because most of the time your in 2wd, unless your in mud, and then it wont matter one bit
Thread
Thread Starter
Forum
Replies
Last Post
shadowmoses
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-30-2015 06:51 PM
xjcarolina
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
09-29-2015 08:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)