How to tell if track bar is bad
#16
CF Veteran
Join Date: Feb 2015
Location: North Carolina
Posts: 1,528
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
for the top side, cut between the bracket and the trackbar. Then for the bottom, cut between the track bar and the bracket on each side, that way the bolt head/nut will just fall off. And then the rest will fall right off
#17
Junior Member
Thread Starter
Join Date: Aug 2016
Location: Louisville, KY
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
Thanks. I guess thats the route ill have to go.
#18
Junior Member
Thread Starter
Join Date: Aug 2016
Location: Louisville, KY
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
Well I finally got around to cutting off the bar. It's off but when I cut off the tie rod end, the bolt is stuck in the bracket. Any idea how to get it out? I've used heat, vice grips, hammer and punch. It's stuck.
#20
Junior Member
Thread Starter
Join Date: Aug 2016
Location: Louisville, KY
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
Thread
Thread Starter
Forum
Replies
Last Post
KTW
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
12-22-2016 08:29 AM
Muddz
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
04-05-2016 10:23 AM
Consultant30
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
03-21-2016 06:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)