How to..Front pinion seal on Trasfercase
Thread Starter
Seasoned Member
Joined: Mar 2013
Posts: 461
Likes: 1
From: Las Vegas NV.
Year: 1995
Model: Cherokee
Engine: 4.0 I6 High Output
Hello Cherokee forum...
Can anybody give me directions or reference to another thread?
On How to replace the front pinion seal on the transfercase?
Thank you in advance
Can anybody give me directions or reference to another thread?
On How to replace the front pinion seal on the transfercase?
Thank you in advance
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Remove drive shaft,remove nut,remove yoke,remove seal,install new seal,install yoke,tighten nut,reinstall drive shaft,check transfer case fluid.
Thread Starter
Seasoned Member
Joined: Mar 2013
Posts: 461
Likes: 1
From: Las Vegas NV.
Year: 1995
Model: Cherokee
Engine: 4.0 I6 High Output
so nothing special about removing the yoke and the seal.
probably pry out the seal?
what should the nut that holds the yoke be torque at?
probably pry out the seal?
what should the nut that holds the yoke be torque at?
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
May 5, 2024 12:21 PM
carbuff
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Sep 30, 2015 11:24 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



