Help with TR end
03-10-2009, 05:34 PM
#1
Newbie
Thread Starter
Join Date: Mar 2009
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Help with TR end
I went to get my jeep aligned today, and they refused to do it until I replaced a bad tie rod end. Understandable. The TR that's bad is the one that connects to the pitman arm...it's a short one...The mechanic said that it was, "loose as a goose."
Well, I took the old one off and compared it to the new one i bought from autozone, and noticed no difference. On both the old and the new, the TR end moves freely. From my experiences w/ TR ends, this is not a good thing. So I'm not sure if it is supposed to be like this, or if I'm missing something.
Any help would be appreciated!
Well, I took the old one off and compared it to the new one i bought from autozone, and noticed no difference. On both the old and the new, the TR end moves freely. From my experiences w/ TR ends, this is not a good thing. So I'm not sure if it is supposed to be like this, or if I'm missing something.
Any help would be appreciated!
Thread
Thread Starter
Forum
Replies
Last Post
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-10-2015 09:21 AM
ARCH4NGEL_II
Modified XJ Cherokee Tech
0
09-07-2015 12:18 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
