In my quest for better fuel usage and long term JEEP life, I just received an Actron CP9180 scanner with o2 sensor monitor. I am having trouble decoding the tests. Anyone with a field service manual let me know what these mean.
Thanks,
K
Code:
This I understand. No codes and all 7 sensors are accounted for.Global OBDII Non OBDIM Monitors Since DTCs Cleared Misfire Monitor ok Fuel System Mon ok Comp Component ok Catalyst Mon ok Htd Catalyst n/a Evap System Mon ok Sec Air System n/a A/C Refrig Mon n/a Oxygen Sens Mon ok Oxygen Sens Htr ok EGR System Mon n/a Global OBDII Non OBD No Codes Found
Code:
I understand there is a small EVAP leak, possibly an old gas tank cap I can easily replace as a starting point.Global OBDII
Non OBDCodes
Pending DTCs
P0456 Mod $D1
<PENDING>
EVAP System Very
Small Leak
Code:
This is something I can't seem to track down after DAFS! Anyone know what these Tests and "LOW" status means???Diagnostic Monitors Test $11 ID: 01 MAX: ---- MEAS: 1e MIN: 22 STS: LOW MOD: $d1 Test $51 ID: 01 MAX: ---- MEAS: 0 MIN: fe STS: LOW MOD: $d1 Test $53 ID: 01 MAX: ---- MEAS: 0 MIN: fff7 STS: LOW MOD: $d1 Test $62 ID: 01 MAX: ---- MEAS: 16f MIN: 197 STS: LOW MOD: $d1
Thanks,
K
Bump. Hour and half searching Internet, and nothing is shedding enough light to pursue a course of action. Anyone??
K
K
Quote:
Determine if the emissions system is running at it's optimal efficiency. I am using a scan tool to read sensor data, temp data, and run diags on the emissions system. Unfortunately without more info on what TEST $11, $51, $53, and $62 are, I am kinda lost.Originally Posted by papod
what are you trying to do?
K