help me I'm lost before the cold months ahead
Hey guys and gals.
I have a little problem with my blower motor, it only works on high the resistor is fine I checked the resistence is different at different settings, the wiring is fine I cheched the voltage at different settings and it flows, even with the resistance off, the motor stills goes when on high. I don't know what to check next. I have the haynes manual and I looked at the diagram, but no help :wacko: help me plz FRED |
Originally Posted by Fred1diver
(Post 290165)
Hey guys and gals.
I have a little problem with my blower motor, it only works on high the resistor is fine I checked the resistence is different at different settings, the wiring is fine I cheched the voltage at different settings and it flows, even with the resistance off, the motor stills goes when on high. I don't know what to check next. I have the haynes manual and I looked at the diagram, but no help :wacko: help me plz FRED I have the same problem. I just leave it on high till it warms up then turn it off. It sucks to keep having to do but it works. |
have you checked the switch?
|
yep, first thing I checked, even used the switch to see if the voltage went to the resistors.
FRED |
All times are GMT -5. The time now is 03:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands