So my blower would only work on high which is a sign of the resistor, so i replaced my resistor and now it doesnt do anything. When i first put the new resistor in it blew the fuse, i replaced that and its still not doing anything. But when i turn the switch to low medium and high my lights dim like its trying to do something. I dont know if it is my blower motor or if its the switch. Can someone point me in any direction of which one it might be?

 

check for current at the plug to blower motor resistor

 

i went to the parts store and they are saying that it may be my relay. But i will check that too. Do you know where the relay is at for the heater?

 

not sure checking for current at the plug will teel where to go next if no power id check relay if thats not it go to switch ,its very common for the plug at the switchs to melt my 94 did it

 

blower motor realy is what you looking for i think

 

behind the glove box it in this link towards the middle of pageshttp://www.jeep4x4center.com/jeep-se....swf#toolbar=0