Headlights stuck on high beam
#1
Newbie
Thread Starter
Join Date: Apr 2016
Location: Henrico, VA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 Litre
Headlights stuck on high beam
2001 Cherokee Sport.
The turn signal/high/low selector lever moves from high to low beam and clicks into place but the lights stay on high beam and the high beam indicator on the dash stays lit.
Any idea where to look?
Thanks
The turn signal/high/low selector lever moves from high to low beam and clicks into place but the lights stay on high beam and the high beam indicator on the dash stays lit.
Any idea where to look?
Thanks
#3
Member
Join Date: May 2013
Location: SC
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: I6
Is your jeep by chance from Canada? Mine was, and the Daytime running light module (required by the Canadian DOT) was bad. I had the same problem with the high beams and dash light staying on. Just had to unplug the module. Problem solved. Don't know about your year jeep but on mine the module was up near the firewall on the passenger side.
#4
Newbie
Thread Starter
Join Date: Apr 2016
Location: Henrico, VA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 Litre
Thanks for the responses. It just needed a new multifunction switch. $48 to NAPA and an hour of garage time and she's good to go. On to the next issue.
Thanks
Thanks
#5
Thread
Thread Starter
Forum
Replies
Last Post
cartmen
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
08-14-2022 06:35 AM
Cruzship22
Aftermarket electrical systems
9
02-06-2017 08:36 AM
Xj'd
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
07-17-2016 07:45 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)