Head gaskets
#1
Seasoned Member
Thread Starter
Join Date: Jun 2012
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Head gaskets
I'm doing a head swap and I am looking at gaskets and I wanna know if I should get the "severe duty" head gasket. Is it worth the extra $? Will it give me better compression or something?
#2
Member
Join Date: Jun 2012
Location: Gastonia, NC
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
If memory serves me right, the fel-pro severe duty line of head gaskets are slightly thicker and have a considerably stronger "fire ring" to hold up to higher compression. However, more often than not, you have to make sure that you have a very flat block and head. The cheaper one is more forgiving on the deck surface. This is my experience with them on 2.3(lima) turbo fords.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
91cherokeeSC
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
41
10-29-2015 01:49 PM
Karmageddon
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
10-05-2015 08:29 PM
Crazynut1997
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
09-29-2015 08:14 PM
Dr.Capacitor
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-28-2015 10:26 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)