Having to hit gas to start after installing new fuel projectors
Thread Starter
Newbie
Joined: Mar 2015
Posts: 18
Likes: 0
From: Florida
Year: 1999
Model: Cherokee
Engine: Inline 6
Having to hit gas to start after installing new fuel projectors
So yesterday installed a new thermostat and since I had a bad projectors I said to myself "time to upgrade to the 784s". So did the upgrade and reset the computer after Installation and the first I did it it started up right away for a spin and all was well and driving was smooth. Later on in the day I noticed it wouldn't but as soon as I started up again while hitting the gas, boom starts right up. Any idea what it could be? Maybe my fuel pump need to be changed? Any suggestions would be helpful!
Moderator CF K9-unit
Joined: Apr 2012
Posts: 5,842
Likes: 12
From: Alaska
Year: 2000 sport
Model: Cherokee (XJ)
Engine: New 4.0l from s&j engines
So yesterday installed a new thermostat and since I had a bad projectors I said to myself "time to upgrade to the 784s". So did the upgrade and reset the computer after Installation and the first I did it it started up right away for a spin and all was well and driving was smooth. Later on in the day I noticed it wouldn't but as soon as I started up again while hitting the gas, boom starts right up. Any idea what it could be? Maybe my fuel pump need to be changed? Any suggestions would be helpful!
Maybe its the screen, I would try a Innovations 5 Series.
Last edited by Dumajones; Mar 27, 2017 at 05:33 PM.
