i currently have a 3" skyjacker. i want to go higher! im going to order new 6.5" coils, upper and lower control arms adjustable from 0 to 8" of lift, drop pitman arm for 4'' up to 8" of lift, 2" rear shackles 1.5" tapered lift blocks,plus 1" tranny drop kit. i already have a skyjacker adjustable track bar. what else should i get? this is going to be more or less a custom lift with many different brands of parts. does anyone think this will work good being a short arm kit. i know i need a sye kit but is there any out there lower than 300 to 500 bucks?

 

shocks

 

a have new longer shocks for 6" to 8" forgot i had them but thank you. do you think with all this i should be good to go?

 

um i guess. you probly wanna upgrade the steering somehow though, heavy duty tie rod steering stabilizer ect...ect...

 

I would get a SYE for it. And whatever you do don't go cheap get the tom woods worth it in the long run.

 

drop pit man arm and a cross over steering upgrade will be in order for that high

 

i have a skyjacker steering stabilizer shock now do you mean heavy duty tie rods them selves?

 

yeah A1 is rifgt you might need a cross over steering at that high

 

whats the cross over steering?

 

like this http://baseline4x4.com/proddetail.asp?prod=18050.82

 

If you are going to use the stock length arms and not long arms, you should get a drop bracket so your control arms won't be at such a steep angle.

 

does make a wicked difference in the angles! thank you very much i would probably have never got one! cuz i never heard of it. thanks again

 

Get JCR 1-ton steering. That will work fine.

 

does that help with the ride? or is it more for the flex? as far as the drop brackets go?

 

yes it looks killer similar to mine from rugged ridge but looks stronger and can be mounted either above or below the knuckle