Gas Tank Skid Plate
04-30-2012, 11:57 PM
#1
Newbie
Thread Starter
Join Date: Mar 2012
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Gas Tank Skid Plate
Can anyone confirm if the gas skid plate goes on first and then the hitch or the other way around. It will probably be obvious when I start, but a little help would be appreciated. Thanks in advance! Also, I don't seem to have the threaded holes for the transfer case skid--do these use a nutsert? If so do you get nutserts from a fastener store or dodge directly?
05-01-2012, 06:48 AM
#3
CF Veteran
Join Date: Apr 2008
Location: Smiths Station, Al
Posts: 7,661
Likes: 0
Received 13 Likes
on
10 Posts
Year: 87
Model: Wagoneer
Engine: 4.0 I6
When i did mine i had no clue. But i ended up with skid first then hitch. It just fit better that way. It really a sucky job though. I got my nut strips from the JY i got the skid plate from. But you can order them from just about any offroad site that makes rear bumpers.
When installing then u will have to put them up at the se time since they use alot of the same holes in the frame. Sucky part have fun
When installing then u will have to put them up at the se time since they use alot of the same holes in the frame. Sucky part have fun
Thread
Thread Starter
Forum
Replies
Last Post
jpmarine6786
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-10-2015 07:46 PM
Chick-N-Picker
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-06-2015 03:34 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
