Fuse block
05-07-2011, 01:42 PM
#1
Senior Member
Thread Starter
Join Date: Mar 2011
Location: Las Vegas
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.oL H.O. 784 injectors, EV6 to EV1 connectors, APN header, Dynomax exhaust
Fuse block
Can the fuse block be removed/replaced without splicing all the circuits?
I know there is a ~6ish mm bolt holding the harness to the fuse block on the engine side and two screws holding the two halves of the block together. One of the contacts on my blower motor circuit is gone which is the reason for the fix.
I know there is a ~6ish mm bolt holding the harness to the fuse block on the engine side and two screws holding the two halves of the block together. One of the contacts on my blower motor circuit is gone which is the reason for the fix.
05-07-2011, 01:47 PM
#2
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
no it cant what you can do is cut that circut off the back of the box and install a in line fuse between the two wires
05-08-2011, 12:44 AM
#4
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
it works had to do it on my brake light fuse circut because of clutch master leaking onto fuse box
Thread
Thread Starter
Forum
Replies
Last Post
ZJBeachRunnerGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
18
03-10-2021 05:52 PM
CJG
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-28-2015 03:46 PM
Snajo
Other Vehicles. Other Jeep models & cars and trucks of other makes
0
09-26-2015 11:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)