front shocks.....quick question
#1
Member
Thread Starter
Join Date: Feb 2011
Location: Carlisle, PA
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
front shocks.....quick question
im doing my front shocks got some shocks from a buddy who didnt use them, but his did not come with the "little bracket" that goes inside the rubber end to screw onto the XJ....any tips on how to get the old ones out and then slip them into the new ones? iv tried a couple things wanna see if others have done this
#2
Senior Member
Join Date: Jun 2009
Location: Central Pennsylvania
Posts: 670
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee (XJ)
Engine: 4.7 H.O.
I use the bench vise at the shop to press them in and out. Set it in the vise so the end of the bracket is being pressed with the jaw and position the shock so that the other jaw is just below where it will come out the other side. Use some grease on the bracket and bushing when pressing them back in so you don't damage the bushing.
Thread
Thread Starter
Forum
Replies
Last Post
Wybuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
01-30-2024 08:59 AM
CherokeeHoonigan
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
7
09-03-2015 11:43 AM
madmanmarty
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
30
08-30-2015 03:17 PM
Jooman07
Modified XJ Cherokee Tech
25
08-28-2015 02:25 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)