I just replace all of the uca bushings and all lca bushings and the when in reverse stepping on and off the brakes it feels like the whole axle moves, any suggestions??

 

I've found, at least in mine, that clunking noise and shifting feeling could be breaks. Check your drums. Beyond that, idk...

 

Did you use an accurate torque wrench for reassembly?

 

I used a accurate torque wrench for the entire reassmebly, but I was wondering if it could be the u-joints on the front axle

 

Drive axle u-joints? does it clunk & fight with the steering wheel when turning?

 

Pop front end up till wheel is off ground, hold wheel joint and twist wheel back and forth a bit, see if you can feel movement in it? Or with wheels on ground, twist drive shafts and see if they move at all. There should be no play in em..

 

With the wheels on the ground the rear doesn't move but the front one twists like 1/2" and towards the axle it moves up and down very lil